ETT HT-SW-2;
特点:割段样品不损失样品水分,粒度可以通过筛网控制;
1粉碎室直径5cm , 固定刀片4片, 旋转刀1组 (四面)
处理量: 3kg/hr
2粉碎粒度由筛网控制, 一台附3个粉碎筛 20、40、60 mesh
3粉碎时可連续进料
4粉碎面采玻璃设计, 可清楚观察粉碎结果,并有马达过热安全保护
5粉碎室可正面完全打开, 清理试料及刀片
6粉碎室与主轴一体成形, 使用时低噪音
7切割式刀口设计, 可适用于轫性较大之物品
8无段变速 0~3000rpm
9入料口直径:15mm
10电源: AC110V 1/4马力
11尺寸: 21 X 29 X 24 cm
12重量: 约13 kg
13通过ISO9001认证

================

ETT HT-SW-2;
Features: Cut section sample samples without loss of moisture, particle size can be controlled through the screen;
A grinding chamber diameter of 5cm, the fixed blade 4, a rotary blade set (four)
Handling capacity: 3kg/hr
2 Particle Size crushed by the screen control, an attached three smash 20,40,60 mesh sieve
3 crushed to continuous feedstock
4 crushed glass design surface mining, crushing results can be clearly observed, and motor overheat safety protection
5 grinding chamber can be completely open front, cleaning materials and blade test
6 the crushing chamber formed integrally with the spindle, when the low-noise
7 cutting blade type design, applicable to the firmware of the larger items
8 variable speed 0 ~ 3000rpm
9 into the data port diameter: 15mm
10 Power: AC110V 1/4 horse power
11 Size: 21 X 29 X 24 cm
12 Weight: about 13 kg
13 passed ISO9001 certification